Ninoma

Gekijouban Mahou Shoujo Madoka★Magica: Hangyaku ...Gekijouban Mahou Shoujo Madoka★Magica: Hangyaku no Monogatari - Akuma Homura - Kyuubey - 1/8 ...

Osta

Julkaisut

Made to order.

Order period: 2014/5/23 ~ 2014/7/28

Includes an alternative expression and opened wings.

Kuvat

Loading...

© Aniplex / Stronger / Magica Quartet / Miyajima Katsuyoshi

Kiinnostavia kommentteja

2322 vuotta sittenwaterbottlewaterbottle
I'm just gonna have to blindly preorder her without looking at the price. Ignorace is bliss.
1482 vuotta sitten (2 vuotta sitten)ponnieponnie ~Donyatsu Huntress~
I post it for those asking where to get her.

Those from USA, Canada, Central America, South America, Australia, New Zealand, United Kingdom, and Ireland can order her at Rightstuf. No pre-payment required.

Those living or residing in Japan till next year can order her at Aniplex+.
Those lucky enough to have a GSC partner shop in their area (mostly EU) can order her there.

The unlucky ones who have no options in the abovementioned categories are left with BiJ, NY, MBT and proxy orders. If you have an option for stores that offer her on a made-to-order basis, please, refrain from ordering her at BiJ and NY for the sake of the unlucky ones with no Aniplex retailers around.

Those who can't pre-order at Rightstuf or GSC partner shops and missed out on other shops that offered her to international customers can use forwarding service (e.g., BiJ or Tenso and the like) or a proxy of choice. There's a good guide if you don't know how forwarding order works. Also, the figure is made to order and unless Aniplex meets the limit earlier she can be pre-ordered till July 28.

Update! Those who missed out on her at BiJ and Nippon-Yasan and can't order at Rightstuf can still order her at Yokatta!

Lue lisääkommenttia (2741)

01 päivää sittenHalcioneHalcione
SkiaEsh (1 päivää sitten) #19228349I contacted Tap Plastics recently and whoever I got said they could not make custom plastic rods in that size. Did you email/call them at a specific email/number?

I filled out the order form from the same page I linked. In the length field I put "Other (specified in comments)", and when the comments came up, I put down how long I wanted them. They got back to me a bit later to confirm that a length outside their pre-sets would require an extra (small) fee, I accepted, and voila.

I'll be severely disappointed if they changed their stance on that. They're the only company that didn't ignore me completely :(
01 päivää sitten (1 päivää sitten)SkiaEshSkiaEsh
Halcione (22 päivää sitten) #18689537I took these before I got a rod for mine:
(mfc link)
(mfc link)
From what I've heard from others, my case wasn't even as THAT bad. Here are after rod photos for comparison:
(mfc link)
(mfc link)
The main point too look out for is her spine. It should be relatively straight. If yours looks fine, I'd recommend not fiddling with her or you might cause the lean, like it happened to me.
If it IS leaning, I got my rods from TAP plastics ([ext link ]). They were the only company I got a hold of that'd let me decide a custom length for the rods for a small extra fee. You want a rod length of 13cm, diameter should be relatively small like 8-10mm. The folks at TAP should be able to hook you right up with the needed rod.
Other than that, I recommend getting some foam pads for both ends of the rod to avoid scratching. I personally got some relatively large square ones off ebay and used scissors to get them the right size, you'll want to either get ones that are adhesive on only one side (the rod side), or double sided but keeping the protective paper on the side you're gonna prop her up with so she doesn't get all adhesive and stuff under there. I'd also recommend them being a bit on the thicker side so they really cushion her well and avoid the edges, I cut my pads a bit larger than the actual rod so there'd be excess draping over the edge for extra safety, but that might be overkill, not 100% sure :V
Then just put the thing in. You may need to place it at a bit of an angle due to the curved base, so it doesn't slide off, but it's not too hard :)


I contacted Tap Plastics recently and whoever I got said they could not make custom plastic rods in that size. Did you email/call them at a specific email/number?
02 päivää sittentrashboat999trashboat999
FandomTrash (3 päivää sitten) #19204124if anyone decides to sell her for under $185 w/o a leaning problem, please PM me! I don't care about the condition o for the box or the plastic wrapping (as long as there is one).

pm'd!
03 päivää sittenFandomTrashFandomTrash
if anyone decides to sell her for under $185 w/o a leaning problem, please PM me! I don't care about the condition o for the box or the plastic wrapping (as long as there is one).
010 päivää sittenAlsoarAlsoar
Halcione (10 päivää sitten) #19001549I considered this approach too, but I backed off at the end. Since her dress is kinda uneven and at an angle, I didn't think it'd rest properly and could slide down and scrape itself. How did you manage? Is that spot on the dress even enough for this, or did you use plenty of padding, or even neither and I was just being paranoid? :x

I just stuck the stand into a dress gap and be done with it. It seemed to balance fine since it's across to where her pegs are. Her dress isn't slippery enough for it to slide off (hasn't slipped yet for the last half year and if it did, i don't think there'll be any damage)

I took some more pictures since it probably does a better job than my explanation.

http://s1.tsuki-board.net/image/600/Alsoar1489586972.jpeghttp://s1.tsuki-board.net/image/600/Alsoar1489586974.jpeghttp://s1.tsuki-board.net/image/Alsoar1489587023.jpeg
010 päivää sittenHalcioneHalcione
Alsoar (10 päivää sitten) #19001170An alternative to supporting her buttocks is supporting her dress instead.
The dress on mine almost touched the ground, so i grabbed the support stand from Exelica since she didn't needed it.
I haven't had any issues for the last 6 months, so it seems to be working.


I considered this approach too, but I backed off at the end. Since her dress is kinda uneven and at an angle, I didn't think it'd rest properly and could slide down and scrape itself. How did you manage? Is that spot on the dress even enough for this, or did you use plenty of padding, or even neither and I was just being paranoid? :x
010 päivää sitten (10 päivää sitten)AlsoarAlsoar
An alternative to supporting her buttocks is supporting her dress instead.

The dress on mine almost touched the ground, so i grabbed the support stand from Exelica since she didn't needed it.

I haven't had any issues for the last 6 months, so it seems to be working.

http://s1.tsuki-board.net/image/Alsoar1489584243.jpeg
014 päivää sitten (12 päivää sitten)sesshysesshy
Hello, i am selling her new from Europe for 200 euros (with shipping included). Never opened
Pm me if interested
Thank you
014 päivää sittenenjoime_CBenjoime_CB
There's 2 on amiami A/B 16,780yen hurry!!
018 päivää sittenTomoeTomoe neL killed my wallet
Halcione (22 päivää sitten) #18689537Text

Oh my gosh, thank you so much for all of your help! :') This was super helpful information!

Näytä lisää kommentteja

Yhteisö

Lue lisääArtikkelit (18)

Lue lisääLiittyvät klubit (7)

Lue lisääListat (294)