Loading

Spider-Gwen - Amazing Yamaguchi No.004 - Revoltech (Kaiyodo)

Spider-Gwen - Amazing Yamaguchi No.004 - Revoltech (Kaiyodo)
Kategoria
Alkuperät
Materiaali(t)
Mittasuhde & Mitat
H=155mm (6.05in)
Julkaisupäivä
06/23/2017 As Standard
Japanilainen
6,474 osumaa • 45 kommenttia11 suosikkia

Myynnit

Osta

kommenttia45 kommenttia

0pt
In stock @ Ninoma (MFC Partner) (¥5,132)

Product page : www.ninoma.com/...
Official new item , shipped worldwide from Japan
About 46 USD | 38 EUR | 57 CAD
0pt
In stock @ Solaris Japan (¥5,486)

Brand New for ¥5,486
└ Carefully packed with ♥
Pre Owned for ¥5,270
└ Check product page for item condition.
0pt
This is such a great figure, I'm having a lot of fun coming up with poses for it. :)
2 kuukautta sitten
0pt
In stock @ PlazaJapan
Please check our product page for more details → www.plazajapan....
2 kuukautta sitten
0pt
goliathfasa (3 kuukautta sitten) #23710370Finally got time to take some pictures and post them.
My guess is also that the hole in the lower leg piece is set at an off angle. The revol joint itself looks to be fine.
picture/1796460...
picture/1796461...


From the looks of it, it's highly likely due to the drilled hole on the leg. The position's a bit lower than how it's supposed to be placed.
3 kuukautta sitten
0pt
TwinkieSupreme (3 kuukautta sitten) #23523028Hmmmm. could you put up some pictures? My hunch is either the joint's range is off or that the drilled hole is at a off angle. Both of which are somewhat rare but are very evident in Revoltech figures. QA for Revoltech tends to be a mixed bag.
Finally got time to take some pictures and post them.

My guess is also that the hole in the lower leg piece is set at an off angle. The revol joint itself looks to be fine.

picture/1796460...
picture/1796461...
3 kuukautta sitten
1pt
goliathfasa (3 kuukautta sitten) #23520158Well one leg straightens out perfectly, while the other one seems bent at an angle.
And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?


Pop off the right hip part (that connects the thigh to the t-bar) and check for an "L" on the inside. I think I had the same problem. Mine had 2 left hips, so the left leg was perfect, but the right leg always was off

[Edit]

Whoops, Didn't see you said lower leg. Problem might be he same. QC might have messed up and given you 2 lower left legs
3 kuukautta sitten
1pt
goliathfasa (3 kuukautta sitten) #23520158Well one leg straightens out perfectly, while the other one seems bent at an angle.
And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?


Hmmmm. could you put up some pictures? My hunch is either the joint's range is off or that the drilled hole is at a off angle. Both of which are somewhat rare but are very evident in Revoltech figures. QA for Revoltech tends to be a mixed bag.
3 kuukautta sitten
0pt
TwinkieSupreme (3 kuukautta sitten) #23508750Is that the knee joint? If it is, it's a case to case basis but from my experience with Revoltech figures, their joint system or joints per se don't always have the same range. You'll have to work around it if you want to give Revoltech figures vanilla poses.
Well one leg straightens out perfectly, while the other one seems bent at an angle.

And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?
3 kuukautta sitten
Näytä lisää kommentteja
Character & Hobby Shop

Kuvat86

Liittyvät kohteet 0

Yhteisö

Pisteiden keskiarvo
8.59/10 arvioitu 17 kerta(a)

Liittyvät klubit 0

Historia 6

Lisännyt
SixsauerRGBlv9 8 kuukautta sitten
Viimeksi muokannut
SionaVIBlv50 3 kuukautta sitten