Loading
KotiTietokantaKohde #27735
Anime, Figures and Manga For Less!

Trigun: Badlands Rumble - Nicholas D. Wolfwood - Revoltech - No. 092 (Kaiyodo)Trigun: Badlands Rumble - Nicholas D. Wolfwood - Revoltech - No. 092 (Kaiyodo)

Trigun: Badlands Rumble - Nicholas D. Wolfwood - Revoltech - No. 092 (Kaiyodo)
Kategoria
Luokittelut
Versio
Materiaali(t)
Mittasuhde & Mitat
H=150mm (5.85in)
Julkaisupäivä
06/2010 As Standard
Japanilainen16,534 osumaa • 30 kommenttia2 suosikkia

Osta

kommenttia30

0pt
Anyone know how to get this guy to hold the older Planet Gunsmoke's Punisher?
1 vuotta sitten
3pt
Waiting for a release of this awesomeness!!!!
3 vuotta sitten
0pt
Cyborg (3 vuotta sitten) #2979406It may be a mistake factory. I, in two of mine, have had to file them with a small screwdriver to enter good. Try this.I file the shoulder of my Gurren Lagann and optional Enkidudu hands, because it does not fit into the joint. Enkidudu I'm 99% sure that dont exist bootleg.
In youtube haves reviews.

Ah I see. Thanks for the info. Shame they don't make them better...
3 vuotta sitten
0pt
CUD (3 vuotta sitten) #2978797If the joints look normal then how can i use them? The joint seen in image 4 cannot fit into the hole of the part on the right in image 3.It may be a mistake factory. I, in two of mine, have had to file them with a small screwdriver to enter good. Try this.I file the shoulder of my Gurren Lagann and optional Enkidudu hands, because it does not fit into the joint. Enkidudu I'm 99% sure that dont exist bootleg.
In youtube haves reviews.
3 vuotta sitten
0pt
Cyborg (3 vuotta sitten) #2977039. It is more easily detected in the quality of the box, usually it damaged. and also in finishing plastic Figure.Joints appear normal in the picture
If the joints look normal then how can i use them? The joint seen in image 4 cannot fit into the hole of the part on the right in image 3.
3 vuotta sitten
0pt
CUD (3 vuotta sitten) #2974175I'm concerned that my figure may be fake.
I asked on another site previously about this figure but hopefully I can get some more help here. I was concerned primarily by the smell (as odd as that may sound, I'm not sure how to really describe the smell) and the lack of 'clicky' joints. Since then I checked out the other parts included with the figure and my concerns only increased...
Just to list the issues (apologies for bad images):
* First here is the figure itself with Vash. The fists are what he came with attached:
Image 0
* Odd joint that I haven't seen on a Revoltech figure before. It actually doesn't come out, if I tried it would break the part because of the way it's attached. It can swivel but it's definitely not a regular Revoltech joint.:
Image 1
* The other parts don't have the same size hole as the usual Revoltech joint as seen in Image 4. The part on the left in both image 2 and 3 has the right size hole for the joint (Image 4) but the one on the right isn't. So I'm unable to use these parts...
Image 2
Image 3
Image 4
The figure was used and missing 2 parts but the seller generously refunded me $50 of $74 so I'm not unhappy with the seller who has sold me two other Revoltech figures which have no issues that this one does.
That's the main issues I think. If any one with experience with Revoltech figures can help me out I'd really appreciate it.
. It is more easily detected in the quality of the box, usually it damaged. and also in finishing plastic Figure.Joints appear normal in the picture
3 vuotta sitten
0pt
I'm concerned that my figure may be fake.
I asked on another site previously about this figure but hopefully I can get some more help here. I was concerned primarily by the smell (as odd as that may sound, I'm not sure how to really describe the smell) and the lack of 'clicky' joints. Since then I checked out the other parts included with the figure and my concerns only increased...

Just to list the issues (apologies for bad images):

* First here is the figure itself with Vash. The fists are what he came with attached:
Image 0

* Odd joint that I haven't seen on a Revoltech figure before. It actually doesn't come out, if I tried it would break the part because of the way it's attached. It can swivel but it's definitely not a regular Revoltech joint.:
Image 1

* The other parts don't have the same size hole as the usual Revoltech joint as seen in Image 4. The part on the left in both image 2 and 3 has the right size hole for the joint (Image 4) but the one on the right isn't. So I'm unable to use these parts...
Image 2
Image 3
Image 4

The figure was used and missing 2 parts but the seller generously refunded me $50 of $74 so I'm not unhappy with the seller who has sold me two other Revoltech figures which have no issues that this one does.

That's the main issues I think. If any one with experience with Revoltech figures can help me out I'd really appreciate it.
3 vuotta sitten
1pt
He really needs a re-release. It feels wrong only owning Vash.
3 vuotta sitten
0pt
Selling for $60. Only in the US. PM me.
4 vuotta sitten
0pt
I'm selling the figure: SALE #41690
5 vuotta sitten
Näytä lisää kommentteja